On site

Every check, every door, nothing missed.

Each door is worked through the same 12 sections, from certification and gaps to the self-closer and signage. Checks that don't apply, such as glazing on a solid door, drop out on their own, so every door still ends with a complete record.

  • ✓ Gap readings in millimetres, with the worst one recorded
  • ✓ Photos and a priority on every defect
  • ✓ Repair, replace or investigate: your call for the door as a whole
  • ✓ Doors you couldn't get into, recorded with the reason
FD-014 — Flat 12 entrance · FD30S Fail

4.3 · GAPS

Lock-side gap within tolerance (typically 3mm ±1mm – record reading)

Reading: 7 mm · Priority: Short term (1 month)

RESULTFail ACTIONRepair PHOTOS2

What you get

From the door register to the finished report.

Bring your door register

Paste the building's existing register straight from Excel, or upload it as a CSV. Columns are matched by meaning, not exact headings, and any problem rows are flagged rather than the whole file refused. Add doors you find on site as you go.

A 46-point checklist

Twelve sections per door: certification, leaf, frame, gaps, seals, hinges, self-closer, latch and ironmongery, glazing, hold-open devices, signage and use. Checks that don't apply to a door drop out on their own.

Built for the corridor

Work through a building's doors on your phone. Next door takes you to the next one still to do, and buildings with hundreds of doors get a search and a filter by status.

A report your client can act on

A branded PDF with your logo: a door action plan with every defect, most urgent first, then the door register, a compliance matrix showing each door's sections at a glance, and your sign-off.

The register carries over

Doors belong to the building, not the visit, so next quarter's inspection starts with the register already in place. Set how often the client has their doors inspected, with the legal minimum shown for buildings over 11 metres, and the Clients page shows when each building is next due.

Reissue without paying twice

Reopen an issued report to correct it or add doors, then issue it again. Doors already charged for on that job are never charged again.

Keeps going when the signal dropsBeta

Stairwells, risers and basements are where the doors are and the signal isn't. Carry on regardless: your answers, readings and photos are kept on your phone and sent when you're back in range. Add Assura to your home screen and use it like an app.

£1 a door. That's it.

£1 per door + VAT, charged when you issue the report. No monthly fee, and reissuing a report only charges for doors you've added since. Use it on its own, or add it to your fire risk assessment plan on the same subscription.

Fire door inspection FAQs

What does a fire door inspection in Assura cover?+

Each door is checked against 46 points in 12 sections: certification and identification, the door leaf, frame, gaps, intumescent and smoke seals, hinges, the self-closing device, latch and ironmongery, glazing, hold-open devices, signage and how the door is used. Checks that don't apply to a door, such as glazing on a solid door, are left out automatically. You record gap readings, photos and a priority for each defect, and a recommended action for the door as a whole.

How much do fire door inspections cost?+

£1 per door plus VAT, charged when you issue the report. There's no monthly fee. If you reopen a report and issue it again, you're only charged for doors added since. You give a card when you sign up, and nothing is charged until you issue your first report.

Do I need a fire risk assessment plan to use it?+

No. Use fire door inspections on its own, fire risk assessments on their own, or both. If you have both, they sit on the same subscription and invoice. You choose at sign-up and can add or switch off either one at any time from Organisation settings.

How often do fire doors need to be inspected?+

In England, the Fire Safety (England) Regulations 2022 require the responsible person in a residential building over 11 metres tall to check communal fire doors at least every three months, and to use best endeavours to check flat entrance doors at least every 12 months. Below 11 metres there's no set frequency, so follow the building's own policy. Assura shows the legal minimum when you set up a job, and you set how often the client has their doors inspected.

See all FAQs →

See it on your own doors.

Book a demo and we'll take you through a fire door inspection, from importing the register to the finished report.

Prefer email? [email protected]